Thursday, March 14, 2019

Glass Greenhouse Advantages

Ordinary greenhouses are made of plastic film, This is a simple and practical cultivation facility that uses bamboo, steel and other materials, and covers plastic film to form arched sheds for cultivation of crops such as vegetables. This greenhouse is easy to construct, easy to use, and low in cost.

However, there is a problem with the material shed, that is, the general weather is good, and it will become like this in case of extreme windy weather.

After all, it is a plastic film that is still relatively fragile. And because of the nature of the plastic itself, short cycle times and degradation, resulting in environmental problems, you need to find a better alternative. Glass greenhouses are undoubtedly a better choice.

Glass greenhouses have the following advantages:
(1) Compared with plastic greenhouses, glass greenhouses have better lighting because of their high  light transmittance properties. Sunlight can more fully enter the interior of the greenhouse while ensuring that crops such as vegetables receive light evenly.
(2) The glass greenhouses are more solid than the plastic greenhouses from the main materials and structures, and can better protect against indoor crops by resisting extreme weather such as wind and rain.
(3) Plastic greenhouses are susceptible to external erosion such as wind and rain. If an accidental fire occurs, it will directly burn and be completely destroyed. Glass greenhouses do not need to worry about these problems, so the life cycle will be longer and the cost of use will be reduced.
(4) If a plastic film is used in a greenhouse, the amount of use will be very large. Once discarded, the degradation of plastic film becomes a problem. Glass greenhouses do not need to consider this issue, so they are more environmentally friendly.

The glass greenhouse will conduct heat through the glass structure, radiate heat to the sky, ventilate and dissipate heat, and the air penetrates into the heat to transfer heat in the ground. Greenhouse energy saving is to reduce the heat dissipation of the greenhouse. An effective method is to install a heat preservation curtain to reduce heat loss at night. Under the premise of meeting crop illumination, it is best to install a double-layer light-transmitting material, which can reduce heat loss by 50%. It is also very effective to use the cold-proof ditch and fill the insulation material to reduce the heat transfer in the ground.
Morn is your turnkey China greenhouse glass supplier,from clear tempered glass,ultra clear glass,AR coated greenhouse glass,diffused glass, and insulated glass,hard coated low e glass,Morn can offer all kinds of glass for your greenhouse.

Related News

PVB Laminated glass VS SGP laminated glass

Laminated glass was generally made of PVB film; since PVB film was originally developed for automotive glass rather than for the building curtain wall industry, it has been used for many years in the construction industry, has a wide range of uses and achieved good safety results. However, due to the flexibility, softness and small shear modulus of PVB film, the two glasses will have relative slip, load capacity and bending deformation after being stressed,it is prone to yellowing, so PVB film laminated glass can be used for general glass curtain walls and is not suitable for high-performance glass curtain walls.
The shear modulus of the ion film SGP is more than 50 times that of PVB and 5 times tearing strength than that of the PVB. When the laminated glass produced by the SGP interlayer is stressed, there is almost no slip between the two glasses; The piece of glass is like a piece of glass, and its bearing capacity is twice that of PVB laminated glass. Under the same load and the same thickness, the bending of SGP laminated glass is only 1/4 of that of PVB laminated glass.
Compared with laminated glass produced by PVB, the performance of laminated glass produced by SGP film is superior because of the following properties;
1. It has high bonding ability to glass and strong tear strength, which can prevent the glass from breaking and scattering.
2. It has strong protective ability, can prevent natural disasters and human damage, and has sufficient resistance to strong winds, earthquakes, violence, theft, etc.
3. It can withstand the sudden impact of indoor personnel, prevent the glass from scattering or the whole out, and avoid indoor people and articles flying out and falling.
4. There is enough residual bearing capacity, and the whole piece will not fall off when the glass breaks and then bends.
5. SGP film has sufficient shear modulus to bend the entire section of the laminated glass, improve the bearing capacity and bending rigidity of the glass, and reduce the glass thickness and glass weight.
6. Can withstand the effects of ultraviolet light, water vapor and external climate change, long-term use will not appear yellowing discoloration.
Morn is your turnkey architectural China glass supplier,PVB laminated glass for glass curtain wall,and SGP laminated glass used for structural glazing are both available.Welcome contact us for more info.

Related News

Difference between PVB,EVA ,SGP interlayer

Laminated glass is also known as safety glass. As the name suggests, laminated glass is composed of multiple layers of glass. Except for the glass, the interlayer in the middle of the glass. Usually there are three kinds of interlayers: EVA, PVB, SGP.

PVB
PVB is a widely used sandwich material for architectural glass and automotive glass.
The storage process and processing method of PVB interlayer is more complicated than EVA, and the requirements for temperature and humidity are high. When PVB is processed, the temperature is controlled between 18 °C and 23 °C, the relative humidity is controlled at 18-23%, and the PVB water content is maintained at 0.4%-0.6%. After preheating rolling or vacuuming, The autoclave was used for heat preservation and pressure keeping, the autoclave temperature was 120-130 ° C, the pressure was 1.0-1.3 MPa, and the time was 30-60 min. PVB complete sets of production equipment requires about 1 million funds, which is difficult for small businesses. A few years ago, it was mainly produced by DuPont, Solutia, and Sekisui. The China PVB was mainly recycled materials for secondary processing, but the quality stability was not very good. In recent years, China PVB manufacturers are also having great development.
PVB has good safety, sound insulation, transparency and UV resistance, but PVB has poor water resistance, and it is easy to delaminated when it is in a humid environment for a long time.
EVA
EVA ‘s cost performance is higher. Compared with PVB and SGP, EVA has better fluidity, lower melting temperature and can be processed at temperatures up to 110 °C.
EVA has a good fluidity of the film layer, and can be subjected to a process such as wire drawing and engraving in the film layer to produce a beautiful decorative glass with a pattern and a pattern. EVA has good water resistance, but its UV resistance is weak. It is easy to yellow and black in long-term sun exposure, so it is mainly used for indoor partitions
SGP
SGP is called the ionic interlayer film (SentryGlas Plus), which is a high-performance interlayer developed by DuPont. Its high performance is:
1. Excellent mechanical properties and high strength. At the same thickness, the SGP interlayer bearing capacity is twice that of PVB; under the same load and thickness, the bending deflection of SGP laminated glass is one quarter of PVB;
2, tear strength. At the same thickness, the PVB interlayer film has a tear strength of 5 times that of PVB, and can be bonded to the glass in the case of tearing without causing the entire glass to fall.
3, strong stability, moisture resistance. SGP laminated glass is colorless and transparent, anti-ultraviolet. After long-term sun and rain, it is not easy to turn yellow, and the yellowing coefficient is less than 1.5. However, the yellowing coefficient of PVB interlayer film is 6~12. Therefore, SGP is the darling of ultra-white laminated glass.
Although the production process of SGP is close to PVB, the terminal price is high.
Morn is your turnkey architectural China glass supplier,PVB laminated glass for glass curtain wall,and SGP laminated glass used for structural glazing are both available.Welcome contact us for more info.

Related News

THE BENEFIT OF INSULATED GLASS FOR CURTAIN WALL

Top building glass curtain wall is generally with insulated glass, glass is the most thin, easy to heat transfer in building external wall material.Insulated glass with aluminum frame of desiccant through the gap above the aluminum frame that makes the air inside the insulated glass stay dry for a long time, with the excellent insulating performance.

High sound insulation: insulated glass can decline of 27-40 decibel noise, 80 decibel traffic noise outside the room, then only 50 decibels.
Eliminate the frost and dew: indoor and outdoor temperature difference is too big, single-layer glass frosting.Insulated glass is due to contact with the indoor air inner glass is affected by the air interlayer, even if the outer contact is very low, also won’t because of the difference in temperature condensation on the glass surface.Hollow glass dew point to – 70 ℃ (excluding rubber strip type insulating glass)
Wind pressure strength increase: curtain wall mainly under wind load, wind pressure resistance become the main indicators of curtain wall.Hollow glass wind pressure strength is 15 times of single piece of glass.
Morn is your turnkey China ,facade insulated glass supplier,welcome contact us for your glass curtain wall projects.

Related News

Safety Glass

Safety glass can be divided into two categories: tempered glass and laminated glass.
Tempered glass is made by passing the ordinary glass through a heat treatment process to increase its strength by 3-5 times, and can withstand an external impact or temperature difference of a certain energy without breaking, even if it is broken, the whole piece of glass is broken into  small particles&fragments. It will not cause injury, so it has certain security. Tempered glass can not be cut, it needs to be cut before tempering, and has “self-explosion” characteristics.
According to different uses, tempered glass can be divided into all types of tempered glass, heat strengthened glass, regional tempered glass, flat tempered glass, and curved tempered glass.
Tempered glass is mainly used in doors and windows of automobiles, trains, ships and buildings.
Laminated glass is a laminated glass composed of two or more sheets of glass bonded together by a transparent bonding material (elastic intermediate layer). Because the bonding material has good impact resistance and bonding performance, when the glass is broken by external impact, the external impactor will not penetrate the glass, and the glass fragments will not fly out and hurt, thereby ensuring safety effect.
Basic function of laminated safety glass
Laminated glass, composed of two glass layers, is the simplest laminated glass and has the following four functions:
  1. Safety .When the external impact is caused, the elastic intermediate layer absorbs the impact, which can prevent the impact from penetrating. Even if the glass is broken, only a small crack like a spider web is generated, and the fragments are firmly adhered to the middle. On the floor, it will not fall off and hurt people, and can continue to use until replacement.
2, anti-theft laminated glass is very tough, even if the thieves cracked the glass, because the middle layer is firmly adhered to the glass, still maintain the integrity, so that the thieves can not enter the room. After installing the laminated glass, the guardrail can be omitted, which saves money and looks good and can get rid of the feeling of the cage.
3, sound insulation Because the PVB interlayer film has a damping function for sound waves, laminated glass can effectively suppress the propagation of noise, especially in buildings located at airports, stations, downtown and roads, after installing laminated glass, its sound insulation effect is very obvious.
4, UV protection performance PVB interlayer film can absorb more than 99% of ultraviolet light, thus protecting indoor furniture, plastic products, textiles, carpets, art, ancient artifacts or commodities from UV radiation and fading and aging.
Morn is glass specialist and can supply all kinds of EN/SGCC certified safety glass.

Related News

MWT70 VS Solarban 70XL-Triple silver low e compare

Morn building materials,our factory is equipped with the most advanced low-E coating machine.

Recently we have developed our most advanced triple silver low-E coating:MWTE70 and MWTE72,with high light transmittance and relatively low solar coefficient and SHGC.

Below is glass performance data comparison with PPG Solarban 70XL.
If you want high performance triple silver low e insulated glass,why not try a cheaper glass supplier option from Morn?
No.Glass optionThickVisible LightSolar EnergyU value(W/2.K)SCSHGC
(mm)LT %Ref %In %Tsol %Rsol %SummerWinter
16 MWTE70 #2+12A+62462121326391.561.620.330.29
26 MWTE72 #2+12A+62465131326381.541.610.340.3
36 PPG Solarban 70XL  #2+12A+62464121325521.561.620.320.27
1.Above data are calculated by LBNL Windows 7.5 based on NFRC 100-2010,actual performance may slightly vary.
2.The date provided is intended solely as a guide.No responsibility is accepted or implied by Morn for its use.
3.It is adjustable for the user to conduct an independent lab test before confirmation of item and order to use to avoid any future misunderstanding or argument as each user’s expection is differs from case to case.
4.The tolerance of published date with respect to photometric properties is +/-3 points normally.
Full triple silver low-E performance data,click here:Morn-Triple silver low-E
Morn -Your turnkey architectural glass supplier.

Related News

MWTE58 VS Solarban 90-Triple silver low e glass performance

Morn building materials,our factory is equipped with the most advanced low-E coating machine.

Recently we have developed our most advanced triple silver low-E coating:MWTE58 and MWTE60,with medium light transmittance and relatively low solar coefficient and SHGC.

Below is glass performance data comparison with PPG Solarban 90.
If you want high performance triple silver low e insulated glass,why not try a cheaper glass supplier option from Morn?
Glass optionThickVisible LightSolar EnergyU value(W/2.K)SCSHGC
(mm)LT %Ref %In %Tsol %Rsol %SummerWinter
6 MWTE58 #2+12A+62452141921351.551.620.290.25
6 MWTE60 #2+12A+62452111321351.551.620.30.26
6 PPG Solarban 80  #2+12A+6245112191.650.260.23
1.Above data are calculated by LBNL Windows 7.5 based on NFRC 100-2010,actual performance may slightly vary.
2.The date provided is intended solely as a guide.No responsibility is accepted or implied by Morn for its use.
3.It is adjustable for the user to conduct an independent lab test before confirmation of item and order to use to avoid any future misunderstanding or argument as each user’s expection is differs from case to case.
4.The tolerance of published date with respect to photometric properties is +/-3 points normally.
Full triple silver low-E performance data,click here:Morn-Triple silver low-E
Morn -Your turnkey architectural glass supplier.

Related News